However, in some cases, you might need to boot from USB drives.
I have Windows 8, Dell laptop.
I changed my password.
Get the answer in the following contents.
Then you’re free to go to theDell Boot Menuand change the boot order to boot from USB.
If you are planning to reinstall or upgrade your operating system, back up your data before the operation.
Are you still confused?
Lets see these moves one by one with the detailed tutorial.
And the detailed steps are listed below.
Step 2: Run Windows 10 Installation Media Tool and accept the applicable notices and license terms.
Step 3: Select language, architecture, and edition.
Then choose your USB flash drive and wait patiently during the process of creating a bootable USB drive.
When the operation is finished, you will get a bootable USB drive that contains Windows 10 installation files.
And you’re able to go to the next move.
If you have anexternal hard drive, you’re free to use it to save the backup.
To save time, its wise to use a third-party data backup tool.
As for the backup tool, you’ve got the option to tryMiniTool ShadowMaker.
And here is how to use this tool to back up files.
Step 1: Connect your external hard drive to your Dell laptop and launch MiniTool ShadowMaker.
Then go to theBackuptab.
Step 3: Select theSourcemodule, choose the items that you want to back up, and clickOK.
By default, the system required partitions are checked.
If you want to back up your system only, you’re able to skip this step.
Step 4: When you go back to the main interface, clickDestination.
Then select a location in your external hard drive and clickOKto save the backup.
Step 5: Click theBack up Nowbutton at the bottom right corner.
Then you just need to wait patiently until all the data is copied to your external hard drive.
Then clickBootable Mediaand follow the onscreen instructions to make a bootable MiniTool Partition Wizard.
Then boot the laptop from the bootable USB drive you just created.
Step 3: When you get into MiniTool Partition Wizard, clickData Recoveryfrom the top toolbar.
Step 4: Select a partition or the whole system disk and clickScan.
Step 5: Check all the needed files and clickSave.
In the pop-up window, select a location on your external hard drive to store them.
Step 2: Turn on the laptop.
When you see the Dell logo on the screen, pressF12orDeleteimmediately to go to the boot menu.
Step 3: Find the boot options and select your USB drive to boot from it.
What should you do if USB devices are unavailable under boot options?
Step 2: PressWin+Ito open WindowsSettings.
Step 3: Go toSystem>Power & sleep.
Then selectAdditional power settingsin the right pane.
Step 4: In the pop-up window, selectChoose what the power buttons doto give administrative privileges.
Then clickChange configs that are currently unavailable.
Step 5: Uncheck the optionTurn on fast startup (recommended).
Step 2: When you see the Dell logo, repeatedly tap theF2key to enter the BIOS setup.
Step 3: In the left pane, expand thePOST Behaviorcategory and selectFastboot.
Here, you should probably selectThorough.
Step 4: Expand theSystem Configuration.
Then:
Step 5: Select theGeneraltab in the left pane.
Then double-check theEnable Legacy Option ROMsandEnable UEFI connection Stackoptions are checked.
How to make Dell XPS and Dell Inspiron boot from USB drives?
Here is a tutorial.Click to Tweet
Bottom Line
How to boot Dell laptop from USB drives?
There are generally three moves you’re gonna wanna take.
you’re able to have a try after reading this tutorial.
If you have any ideas, you could share them with us in the following comment zone.
For any problems with MiniTool software, you’re able to contact us via[email protected].
