HP 250 G5 is an entry-level laptop launched by HP, released in 2016.
This article fromMiniToolwill tell you the complete HP 250 G5 SSD replacement guide.
HP is almost a household name, and its computer products are very famous.
The HP 250 G5 mentioned in this article is an older model of HP computers.
Do I need to replace the HDD connector?
This article will introduce you to how to upgrade SSD on HP 250 G5 in detail.
Why Do you’re gonna wanna Do the HP 250 G5 SSD Upgrade?
Heres a list of what you should do.
Prepare some tools
3.
Buy the right SSD
The HP 250 G5 usually supports 2.5-inch SATA interface hard drives.
ensure the SSD you buy is a SATA III 2.5-inch punch in, not an M.2 SSD.
This method is suitable for those who do not want to reinstall the operating system and some applications.
So how to migrate the old data?
Well, wondering how to clone your hard drive to a new SSD?
Here is the guide to clone a hard drive to a new SSD.
choose theMigrate OS to SSD/HD Wizardfeature from the left action panel.
Step 3: go for the new SSD as the destination disk, then clickNext.
A warning message will pop up, read it and clickYesto continue.
Step 4: Modify the disk layout in theReview the Changeswindow and then clickNext.
Step 5: A warning message How to boot from the Destination disk?
will pop up, and clickFinishto continue.
Step 6: Next, click theApplybutton to carry out the pending operation.
Step 2: Launch MiniTool Partition Wizard to its interface.
Right-hit the disk and then selectCopyfrom the menu.
Also, you might click theCopy Diskfeature from the left action panel.
Step 3: In the pop-up window, choose the new SSD as the target disk, then clickNext.
When prompted to confirm, clickOKto proceed.
Step 4: Review the chosenCopy OptionsandTarget Disk Layout.
If everything looks correct, clickNext.
Step 1: Turn off the HP 250 G5 computer and unplug all external power devices.
Step 2: Turn off the display and place the computer bottom up on the table.
Step 3: Use a screwdriver to remove the screws and store them safely.
Next, use a crowbar to take off the bottom cover.
If possible, wear an anti-static wristband while removing the cover to protect the gear.
Step 4: Use a screwdriver to remove the screws that secure the SSD.
If you cannot boot from the new SSD, set it as the boot drive.
Heres a helpful guide.
Once this method is used, data recovery software cannot recover the data.
Before that, youd better check whether the old hard disk has bad sectors.
you’re able to use MiniTool Partition Wizard to help you do this.
Then, grab the disk you wish to check and choose theSurface Testoption from the context menu to continue.
Step 2: In the pop-up window, click theStart Nowbutton to check the hard drive for errors.
Option 1: Delete Partitions and Create Partitions
Right-choose the disk you want to delete then selectDelete All Partitions.
The partition will then be shown as an unallocated space.
Now you might create the partition you want by using theCreatefeature in MiniTool Partition Wizard.
Option 2: Wipe Disk
Step 1: Right-opt for disk you want to wipe then selectWipe Disk.
Or you might highlight the target disk and selectWipe Diskfrom the left action panel.
Step 2: You will see a pop-up window as shown below.
Choose the one way to wipe.
Then click theOKbutton below to proceed to the next step.
Then, you still need to click theApplybutton to execute all changes.
Click to tweet: Do you know how to do the HDD to SSD upgrade on HP 250 G5?
If you dont know, this article will give you a full guide.
This guide will show you how to do it.
