Minor issues with the hard disk like a few bad sectors or low space can be can be ignored.
But the real problem begins when you have thea rig which does not exist was specifeddriver error pops up.
you might no longer acess the drive even though it is getting recognized by Windows.
Thedataon the line here and if its not solved then you cannot access it.
It gets frustrating when you cant access your drive because of this error.
Table Of Contents
Fix A machine Which Does Not Exist Was Specified Error
1.
Restart the Computer and Check the USB Connections
Do you have an external storage connected through USB?
Then there is a chance that serial bus drivers can malfunction.
So it’s crucial that you restart the computer after disconnecting the external hard drive.
Then connect it again after landing on the desktop in a different USB port.
double-check to check for any loose connections as otherwise, it will cause a connection error.
2. trigger the SFC Tool
Your Windows PC relies on system files to operate properly.
Open theCMDin administrator mode from the Start Menu search.
- throw in the following command and pressEnterto initiate the SFC tool.
This should fix the rig which does not exist and was specific error for you.
verify if your storage or partition is accessible.
So you should probably assign it to fix the unit which does not exist was specified error.
Here is how you’re able to assign a letter.
Connect the external drive if the error is happening to it
2.
PressWindows+Xand head toDisk Managementfrom the menu.
Right-punch the partition or external drive with an error and selectChange Drive Letter and Paths.
Click onChangein the prompt.
Now go for the new letter to assign from the drop-down menu and clickOKto save the changes.
ClickYeson the warning prompt to confirm the change.
Check Disk Scan for Fixing the Drive
Your drive might have some bad sectors, which are not readable.
you might execute the Check Disk scan to reallocate the data in those bad sectors.
This can potentially fixA machine Which Does Not Exist Was Specifiederror.
Here is how you’re free to perform the scan through the command prompt.
Launch the command prompt with administrator rights from the Start menu by searching forCMD.
- jot down the following command and pressEnterto execute it.
Here X is the drive letter of the partition or external drive that is having the error.
So if your F drive is having problems then chkdsk F: /f /r
3.
The scan will take a few seconds to a minute to complete.
Rescan Disk for Fixing Issues
Disk Management has a Rescan Disk feature useful for fixing drive issues.
By choosing this option, the system identifies any disk modifications and updates the drive information.
Here is how you’ve got the option to perform it.
Open Disk Management from the Start Menu shortcut by pressingWindows+X.
Head to the topbar menu and clickAction.
Select theRescanDisksand the rescanning process will start.
Once it is completed, find out if your hard drive or partition errors are resolved.
Give Permission to dive into the Drive
Windows wont let you do many tasks without permission.
Sometimes you cannot jump into the drive because Windows has not granted you all the permissions.
Head to the File Explorer and then clickThis PCfrom the left sidebar.
Right-hit the drive or partition in question, and then head toProperties.
Now go to theSecurity taband see if there is a tick next toFull Control.
If it is not ticked then clickEditbutton.
TickAllownext toFull Controland then clickApple > OK.
This will grant your external drive all the permissions needed to be used on the computer.
It should fix the A gadget Which Does Not Exist Was Specified Error.
it’s possible for you to fix it through the unit Manager by uninstalling the unit from your system.
Head toDevice Managerfrom the Start menu shortcut by pressingWindows+X.
Find your external drive underDrives.
Right-click and selectUninstall gear.
Now confirm the action by clickingUninstallin the prompt.
Disconnect the external drive and then reset your machine.
Then connect the drive after logging in.
So to update the drivers, you gotta find the motherboard model in the following manner.
PressWindow+Rto initiate the run prompt and typemsinfo32, followed by pressingEnter.
Then scroll down toBaseBoard Manufacturer fo the company andBaseBoard Productto find the motherboard model
3.
Then you might go to the manufacturers website to find the latest drivers for updating the motherboard.
you’re able to do that by first formatting it and then create a partition out of it.
Note Recreating the partition will result in loss of data so consider other methods if the data is valuable.
you could do that using the diskpart, a command prompted based tool for creating partitions.
Open Diskpart from the Start Menu by searching for it.
It will list disks connected to the computer.
Then typeSelect Disk3and it will be selected in the Diskpart.
Now typeCleanto format the disk and all your data on the disk will be erased.
Typecreate part priorcreate partition primaryand pressEnter.
This will create the partition in the selected disk.
Now typeactiveand pressEnterto mark the disk as actively selected.
Then punch in the following and pressEnter.
Now bang out the following and pressEnterto assign a letter to the new partition.
If the same issue persists then consider replacing the storage.
This could be why the USB isnt connecting correctly and causing consistent errors.
In such a case, you should consult with a technician and explain the problem to them.
If your motherboard is in the warranty period then consider visiting the service center to get it repaired/replaced.
source: www.techworm.net
