Do you often receive a message reminding you to modernize your TV software?
The section below will list possible causes for this issue and offer some available solutions.
But there are a few things you gotta think about.
Can you accept some configs changes on your Samsung Smart TV without your knowing?
Is there enough storage to store the latest updates on your Samsung Smart TV?
Step 1:Turn on your Samsung TV and verify it is connected to the Internet.
Step 2:Press theMenuorHomebutton on your Samsung TV remote.
Step 3:From this interface, you ought to selectSettingsby using the remote.
Step 5:There will be many options in the part of Support.
you’re gonna wanna choose the option ofSoftware Update.
Step 6:You will see two options from the interface of Software Update.
Here, you are supposed to pick the option ofAuto Updateto set your Samsung Smart TV update automatically.
Well, you’re able to install Samsung TV updates via the Internet.
To do that, c’mon refer to steps below.
Step 1:After turning on your Samsung TV, you ought to connect it to the Internet.
Step 2:Press theMenuorHomebutton on your Samsung remote.
Step 3:Select theSettingsicon by using the remote.
Step 4:Now, you are supposed to select theSupportoption in the left panel.
Step 5:SelectSoftware Update.
New updates will be downloaded and installed on your Samsung Smart TV, which takes a few minutes.
Your Samsung Smart TV will restart after finishing the update.
Before updating, you ought to know about the requirements for the file systems of your USB.
If the file system is not supported by the Samsung Smart TV, your USB cant be recognized.
Here is the list of the requirements for USB file systems.
you might do that by using Disk Management, File Explorer, or Command Prompt.
However, these utilities may prompt you with some errors while formatting.
Hence, MiniTool Partition Wizard is strongly recommended.
Step 1:Insert your USB into the USB port of your gear and launch MiniTool Partition Wizard.
Step 2:From the main interface of MiniTool Partition Wizard, you better right-click yourUSBand selectFormat.
Step 3:In the prompted window, chooseFAT32and clickOKto save changes.
As you see from the above, FAT32 is supported by almost all Samsung TV models.
So, you should choose FAT32.
Step 4:TapApplyto perform the pending operation.
Then hit thespecific modelfrom the list ofSuggested Searches.
Step 2:Now, you will see the detailed information of your Samsung Smart TV.
From this interface, you are supposed to find the target Firmware and hit the option ofDownload.
Step 4:Unplug your USB from your PC.
Step 1:Plug the USB into your Samsung Smart TV.
Step 2:Select theHomeorSmarticon on your Samsung TV remote and selectSettingsin the interface.
Step 3:From the interface ofSettings, you ought to go for the option ofSupportby using the remote.
Step 4:Now, you are supposed to selectSoftware Update.
Step 5:SelectUpdate Nowand then choose the option ofYesby using the remote.
Step 6:Choose the option ofUSBby using your remote, and you will see Scanning USB.
This may take more than 1 min.
on the screen of your Samsung Smart TV.
And then, the TV will show that you have the latest update.
I have failed to get a Samsung TV firmware update.
In addition to that, it offers 3 methods to get Samsung TV software updates.
If you have any problems after using MiniTool Partition Wizard, hey contact us via[email protected].
