Is Anycubic or Ender 3 V2/Pro not reading, recognizing, or detecting SD cards?
if you stumble on the discussed issue, read this post now!
Here,MiniToolsummarizes the possible reasons and provides feasible solutions to theEnder 3 not reading SD cardissue.
Why is Anycubic/Ender 3 not reading SD card?
How can you deal with this issue?
To get the answers, you could focus on the following guide.
Here, this post summarizes some of the most common reasons why Ender 3 not reading SD card.
The following solutions also work for the Anycubic 3D printer not reading SD card issue.
Check the post to figure that out.
If it does, then it’s crucial that you try other solutions.
To fix it, youd better clean the card.
Then wipe the SD card gently by using a soft cloth.
If necessary, you’re able to also use a soft brush to clean the card slot.
On this occasion, to solve this issue, you may need to format the SD card to FAT32.
Just connect the SD card to your PC and then pick one preferred way.
it’s possible for you to complete the format with thisSD card formatterby following the steps below.
Step 1: Right-click theStarticon and selectDisk Management.
Step 2: Right-nudge the partition on the SD card and then selectFormat.
Step 3: In the pop-up window, selectFAT32from the drop-down menu.
Then tick the checkbox next to thePerform a quick formatoption.
Step 4: After that, clickOKto begin the process.
If prompted, clickOKto confirm the operation.
Heres a step-by-step guide on the Ender 3 SD card format.
Step 1: PressWindows+Rto open theRundialog.
Step 2: Typecmdin the text box and then pressCtrl+Shift+Enterto openCommand Promptas an administrator.
Step 3: In the elevatedCommand Prompt, punch in the following commands one by one and pressEnterafter each.
MiniTool Partition Wizard is a great choice.
Step 1: Download and install MiniTool Partition Wizard on your PC.
Then launch it to enter the main interface.
Alternatively, highlight the target partition and selectFormat Partitionfrom the left action panel.
Step 3: SelectFAT32as theFile Systemand then clickOK.
Step 4: Finally, dont forget to clickApplyand thenYesto save the pending change.
Cant eject external hard drive Windows 10?
Check the 5 solutions.
Also, use MiniTool Power Data Recovery to easily restore lost data from external hard drive.
Below MiniTool Partition Wizard tells you how to do this in detail.
Step 1: Connect the SD card to your PC.
Then launch MiniTool Partition Wizard and selectSpace Analyzerat the top toolbar.
Step 2: In the next window, opt for SD card from the drop-down menu.
Step 3: Wait until the scanning completes.
Right-poke the space-consuming and useless files.
Then selectDelete (Permanently)orDelete (to Recycle)to remove them.
Usually, a 4GB or 8GB SD card is the best recommendation.
In addition, you may experience the SD card not reading issue if the SD card gets physically damaged.
Is Ender 3/Anycubic not reading SD card?
Moreover, it offers several feasible solutions to this issue.
Well reply to you as soon as possible.
