Have you gotten the FAT_FILE_SYSTEM0x00000023BSOD error when booting your PC?
How to fix the error?
This post fromMiniToolwill define this issue and provide several feasible solutions.
About FAT_FILE_SYSTEM 0x00000023 BSOD Error
The FAT_FILE_SYSTEM bug check has a value of 0x00000023.
This indicates that a problem occurred in the FAT file system.
Actually, it is aBSOD errormessage.
Once you encounter the 0x00000023 BSOD error, your operating system will crash and fail to boot.
What are the reasons behind this issue?
Before performing the following solutions, you should make a run at remove all peripheral devices.
If it does not work, proceed to the solutions below.
Solution 1.
So, you should give a shot to tune up your rig drivers.
Step 1: Press theWin + Skey and typeDevice Managerin theSearchbox.
Step 2: Expand your desired equipment category and right-click a driver to selectUpdate Driver.
Step 3: In a pop-up window, selectSearch automatically for updated driver software.
Then your Windows will automatically check, download, and set up the latest and appropriate driver.
Solution 2.
Run SFC and DISM Tools
The FAT_FILE_SYSTEM 0x00000023 BSOD error can also be brought on by corrupted system files.
you’ve got the option to repair them by runningDISM and SFCtools.
Here are the steps on how to use SFC and DISM in Command Prompt.
Step 1: Typecmdin the Windows search bar.
Then right-click onCommand Promptand selectRun as administrator.
Step 2: In the Command Prompt window, typesfc /scannowand pressEnter.
Step 3: When the SFC tool completes its task, typeDISM.exe /Online /Cleanup-image /Restorehealthand pressEnter.
Then wait patiently until the process is 100% complete.
So, its important to verify if the hard drive is faulty.
you might use CHKDSK or MiniTool Partition Wizard to do that.
Method 1: Use CHKDSK
CHKDSKis a disk error checking and repair utility built into Windows.
It scans hard drive partitions for internal errors and repairs them at the same time.
Tip: G represents the hard drive partition letter.
It can not only help you check bad sectors but also repair file system errors easily and quickly.
Step 2: Download the software and then launch it to access its main interface.
Step 6: SelectCheck & fix detected errorsand press theStartbutton.
This tool will check and repair file system errors immediately.
Step 8: tap on theStart Nowbutton in the pop-up window.
After that, this tool will scan the whole external drive immediately and show you the test result.
In this case, you might either use thisbad sector repairguide or considerreplacing it with a new one.
Solution 4.
To avoid third-party software conflicts, youd better launch the Windows built-in program Windows Security.
Step 1: Press theWin + Ikey to openSettings.
Then go toUpdate & Security > Windows Security > Virus & threat protection.
Step 2: TapScan Optionsand then choose a scan option based on your demands.
Step 3: Click onScan nowto start the operation.
Solution 5.
Run a Hardware Diagnostics Check
Damaged hardware can also cause the 0x00000023 BSOD error.
So, you should run hardware diagnostics check.
Step 1: Open Command Prompt as administrator.
In the Command Prompt window, typemsdt.exe -id DeviceDiagnosticand pressEnter.
Step 2: In the pop-upHardware and Devicesdialog box, click onNext.
Step 3: This tool will start scanning for any problems with your hardware and recommend a fix.
After that, click onApply this fixif any solutions are found.
Once done, reset your PC and find out if the error still occurs.
Solution 6.
The built-in tool of Windows system Windows Memory Diagnostic helps you test whether RAM works well.
Here is how to do that:
Step 1: Typememoryinto the Windows search bar.
Then click onWindows Memory DiagnosticunderBest match.
Step 3: Wait until the computer finish memory diagnosis.
This process will usually take a few minutes.
Step 4: After the process ends, your machine will boot up.
it’s crucial that you press theWin + Xkey and then chooseEvent viewer.
Step 5: go for the event log and get the memory diagnostics report.
If any errors are displayed in the description, it indicates that there are RAM issues.
In this case, you shouldreplace the RAMwith a new one.
Have you encountered the system hard disk drive needs optimization issue?
This post will provide several feasible ways to fix it.
How to recover data from the 0x00000023 BSOD error?
you could take advantage of a professionalhard drive data recoverytool MiniTool Partition Wizard.
Then follow the steps below to begin the process.
Step 1: In the main interface of MiniTool Partition Wizard, click onData Recoveryfrom the top toolbar.
Here Data Recovery will list 3 parts:Logical Drives,Devices,Recover From Specific Location.
Step 2: Now, opt for target hard drive and hit theScanbutton under the partition.
Step 3: After the scanning is completed, the scanning result is shown in the following picture.
you might double-check each folder to view the contents.
And check all items that you better recover and click onSave.
Step 4: In the pop-up window, select a directory to save the selected files and click onOK.
Youd better save the recovered files to another drive.
Otherwise, the lost/deleted data could be overwritten.
If you are bothered by the FAT_FILE_SYSTEM 0x00000023 BSOD error, read this post now.
you’ve got the option to find the answer in the post.
Here, several solutions to this issue are provides for you.
