Diskpart, a command-line disk partitioning utility, is built in Windows 2000 and later Microsoft systems.
Besides, it is also available in ReactOS.
This utility is used for partitioning internal hard drives and formatting removable storage devices like USB flash drives.
As for wiping disks, Diskpart provides two Diskpart clean commands (clean and clean all).
The section below will compare two commands from several aspects.
Diskpart Clean vs Clean All
Whats the difference between Diskpart clean and clean all?
Then you’re free to choose a suitable command on clean all vs Diskpart clean to wipe disks.
Working Principle
The Diskpartcleancommand deletes all partitions on the target drive.
Is it possible to recover the partitions and data deleted by Diskpart clean?
To know that, you gotta learn what does Diskpart clean do.
If you clean on a wrong disk,undo Diskpart clean commandimmediately.
Theclean allcommand erases the content of the drive securely.
Hence, the deleted data cant be recovered by usual tools.
Also read:[Guide] Repair XD Card Issues and Undelete XD Card Data
2.
Required Time for Wiping the Disk
How long does Diskpart take to clean?
The required time to clean the disk varies on the two commands.
Diskpart clean:This command finishes quickly as it only marks the data on the target disk as deleted.
Diskpart clean all:It takes about an hour per 320GB because it performs a secure erase.
Therefore, you oughta wait patiently.
How long does Diskpart clean all take?
The specific time depends on the capacity of your hard drive.
Clean all vs Diskpart clean on needed time for wiping the disk: Diskpart clean wins.
Security Level
Due to the different working principle of the two commands, they enjoy different security levels.
Compared with Diskpart clean, Diskpart clean all has higher security level.
If you want to keep your data from leakage, Diskpart clean all is recommended.
In fact, plenty of users prefer the clean all command tosecure erase SSD/HDD.
Diskpart clean vs clean all on the aspect of security level: clean all wins.
This post shows you how to undelete Windows 11 partition step-by-step.
With a partition recovery tool, you could recover deleted partition Windows 11 easily.
Usage
Both of the two commands can execute the Diskpart clean disk task.
However, if you want to let Diskpart delete a certain partition, the clean all command wont work.
Then you could only apply theDiskpart cleancommand.
Compared with clean all, Diskpart clean has wider usage.
In this round, Diskpart clean wins.
Specific Steps
Steps for running the Diskpart clean command
Step 1:Open theRunwindow by pressingWindowsandRkeys.
Step 2:Typediskpartin the window and hitEnter.
Step 3:In the elevated window, punch in the commands below and hitEnterafter each.
Steps for running the Diskpart clean all command
Step 1:After opening theRunwindow, typediskpartand clickOK.
Step 2:In the next window, input the following commands and press theEnterkey after each to execute.
Step 3:Wait for the finish of the wiping process.
Diskpart clean vs Diskpart clean all: which one is better?
After reading the above content, you may have the answer in the mind.
Now, its time to make a choice between the two Diskpart clean commands.
Diskpart clean vs clean all: which one is suitable for privacy leakage prevention?
This post shows you the answer.
#1.
Diskpart Clean All Stuck
Wiping disks is a time-consuming process.
Therefore, it is normal to encounter the Diskpart clean all stuck or slow issue.
Whats worse, Diskpart sometimes may fail to clean the disk.
If so, repeat the operation.
Alternatively, directly use a disk wiping tool like MiniTool Partition Wizard to erase the disk.
In most time, this error appears in the following situations.
If the error occurs, execute the methods below to fix it.
What to do when Diskpart clean commands fail to work?
Well, you could wipe disks by using an alternative tool.
Here MiniTool Partition Wizard comes into being.
To be specific, it allowscreating/formatting/resizing/moving/extending/deleting/copying/recoveringpartitions.
With theWipe Diskfeature, MiniTool Partition Wizard helps you erase disks with ease.
As a powerfulfile deleter, it can effectivelydelete files permanently.
When youcant delete files from SD card, it comes into hand again.
More importantly, this feature provides you with 5 options to wipe the disk.
All these options can prevent data from being recovered by most data recovery programs in the market.
you could pick one based on your demands.
How to wipe a disk with MiniTool Partition Wizard?
Heres the complete tutorial for you.
Step 1:Download and install MiniTool Partition Wizard by clicking the button below.
Step 2:Launch this program to enter its main interface.
Step 3:Right-tap on your gadget and clickWipeDiskfrom the context menu.
Step 4:In the prompted window, choose a wiping method from the list and clickOK.
Step 5:Tap on theApplybutton to carry out the operation.
Then the wiping process starts automatically.
You just need to wait patiently until the process ends.
How to wipe a disk if Diskpart clean not working?
MiniTool Partition Wizard is an ideal alternative.
Make your decision after learning the difference between them.
When Diskpart clean commands not working, you might use MiniTool Partition Wizard to erase the disk instead.
It is reliable, powerful, and safe.
Do you have thoughts on Diskpart clean vs clean all?
If you have, share with us in the comment area below.
