This post mainly discussesEMPTY_THREAD_REAPER_LISTincluding its symptoms, causes, and solutions.
If you are experiencing this annoying error, explore the troubleshooting methods offered byMiniToolimmediately.
Symptoms and Causes of EMPTY_THREAD_REAPER_LIST
The EMPTY_THREAD_REAPER_LIST bug check has a value of 0x00000013.
It means that the error code 0x00000013 can appear along with the EMPTY_THREAD_REAPER_LIST error alert.
Though EMPTY_THREAD_REAPER_LIST is one of the infrequent blue screen errors, it still confuses a lot of people.
When the EMPTY_THREAD_REAPER_LIST error occurs, your PC may have one of the following symptoms.
What causes 0x00000013 EMPTY_THREAD_REAPER_LIST?
Software issues:They include timing inconsistency, driver incompatibility, and operating system corruption.
However, these peripherals might be incompatible with the computer and cause EMPTY_THREAD_REAPER_LIST blue screen.
Therefore, you should remove the peripherals connected to the PC once EMPTY_THREAD_REAPER_LIST shows up.
Related article:How to Fix Blue Screen Loop Without Data Loss?
So, you should uninstall them especially if the 0x00000013 EMPTY_THREAD_REAPER_LIST error occurs after you install them.
For doing that, follow this guide.
Steps for Windows 11 PCs
Step 1:Right-tap on theWindowsicon and then chooseSettingsfrom the opened menu.
Step 2:Tap onApps > Installed apps.
Step 3:After you clickDate installed, the latest installed apps will appear on the top.
Step 4:Click thethree-doticon behind the recently installed apps and choose theUninstallbutton.
Then clickUninstallin the pop-up menu again to confirm the operation.
Steps for Windows 10 PCs
Step 1:Open theSettingsapp on the computer.
Step 2:ClickAppsin the main interface ofSettings.
Step 3:From theSort bydrop-down menu, clickInstall date.
Then tap on the recently installed apps at the top of theApps & featuressection and clickUninstall.
Nevertheless, it may also result in EMPTY_THREAD_REAPER_LIST blue screen.
Given that fact, you’ve got the option to consider disabling it if EMPTY_THREAD_REAPER_LIST error alert appears.
To do that, simply run with this.
Step 1:After entering Safe Mode, open theRunwindow by holding theWindowsandRkeys.
Step 2:Typepowercfg.cplin theRundialog window and clickOK.
Step 3:In the left panel of thePower Optionswindow, clickChoose what the power button does.
Step 4:In theSystem Settingswindow, clickChange tweaks that are currently unavailable.
Step 5:Uncheck theTurn on fast startupoption and clickSave changes.
You should scan the system drive to check and fix file system errors.
you could do that by using theCheck File Systemfeature of MiniTool Partition Wizard.
Choose a suitable MiniTool Partition Wizard edition and get it installed on a properly running computer.
After the bootable USB drive is created, boot the faulty computer with it.
Alternatively, highlight the system drive and tapCheck File Systemin the left panel.
Step 2:In the prompted window, select theCheck & fix detected errorsoption and click theStartbutton.
Step 3:Wait patiently until the process finishes.
After the scanning process ends, any detected file system errors on the system drive will be fixed.
Step 1:Boot your machine from a Windows installation disk.
Step 2:When the window below appears, clickNextto continue.
Step 3:In the next window, clickRepair your gear.
Step 4:TapTroubleshoot > Command Prompt.
Step 5:In the elevatedCommand Promptwindow, typesfc /scannowand hitEnter.
Step 6:After the scanning process ends, reset your gear to let the changes take effect.
Then verify if the 0x00000013 EMPTY_THREAD_REAPER_LIST error disappears.
you’re able to also have a try!
Heres a full tutorial.
Step 1:power cycle your gear several times until you seeWindows Preparing Automatic Repair.
Step 2:ClickAdvanced options > Troubleshoot > Advanced options > UEFI Firmware prefs.
Step 3:After entering the BIOS menu, go toFileand chooseApply Defaults.
Step 4:PressF10 > Enterkey to save and exit BIOS.
Also read:BIOS Not Showing on External Monitor?
To be specific, it adds new features and bug patches in the new updates.
you might also update the Windows to the latest version to get rid of EMPTY_THREAD_REAPER_LIST blue screen.
Steps for Windows 11 Computers
Step 1:OpenSettingson your gear.
Step 2:In the left panel of theSettingswindow, clickWindows Update.
Step 3:Tap on theCheck for updatesbutton in the right panel.
Step 4:After a while, all the available updates will be listed.
Download and set up the latest update to your PC.
Steps for Windows 10 Computers
Step 1:After openingSettings, clickUpdate & Security.
Step 2:ClickWindows Update > Check for updates.
Step 3:Hit theDownload and installbutton under the desired Windows update version.
your gear will be free of EMPTY_THREAD_REAPER_LIST after it isrestored to an earlier state.
Step 1:Navigate toSystem Restoreby following the steps offered in Solution 5.
Step 2:In the next window, tick the Choose a different restore point option and clickNext.
Step 3:Select a restore point and click theNextbutton.
Step 4:Tap theFinishbutton.
After that, your system will restart and restore itself to the selected version.
Are you bothered by the 0x00000013 EMPTY_THREAD_REAPER_LIST error?
If so, read this post now!
If you receive this issue, like refer to this comprehensive guide.
With the given methods, you might troubleshoot the EMPTY_THREAD_REAPER_LIST error smoothly.
If you have other questions related to this error, tell us in the following comment area.
We will try our best to work them out.
Our technical support will get back to you as soon as possible.
